JDSU optical modules OTDR CD PMD AP for optical measurements
Discover the full range of optical modules for reflectometer platforms: OTDR, PMD, CD...
JDSU OTDR 81 XX optical modules compatible with JDSU T-BERD/MTS-6000/8000 platforms
Choose the right OTDR module from the JDSU range for your application. Use the table below to navigate easily in this range of products.
-
Compatible with T-BERD/MTS-6000 / T-BERD/MTS-8000
-
Available for PC or APC
-
Fitted with a removable optical adaptor (SC, FC, ST, etc.)
-
Screw tightening system (no specific tooling required)
-
1625 nm filtered for the in-service test
-
Single, bi, tri, quadri and penta-lambda!
With more than 40 available modules, the wide range of JDSU optical modules covers all possible needs for fiber optic measurements in the field via reflectometry.
Modules for former platforms such as the JDSU MTS-5X00 are being restored to their former glory as they are almost all compatible and via a motherboard adapter, can be easily inserted into the new platforms. It is time to order an upgrade!
Below is a non-exhaustive summary of the main OTDR modules available today for the T-BERD/MTS-6000 / T-BERD/MTS-8000 platforms. This table enables us to obtain an overview of the range and choose the appropriate module for fiber optic measurements.
| Model | SRL (MM) |
SRL (MM/SM) |
VSRe | MR | LR | VLR | UHD |
| Wavelength (nm) | 850/1300 | 850/1300 1310/1550 1625 |
1310/1550 | 1310/1550 1490/1625 |
1310/1550 1490/1625 (1625 filtered) |
1310/1550 1383/1490 1625 (1625 filtered) |
1310/1550 1625 |
| Dynamic range (dB) | 25/23 | 25/23 40/38 38 |
32/30 | 40/38 40/37 |
43/41 40/41 |
45/43 44/42 42 |
46/50 46 |
| EDZ* (m) | 0.5 | 0.5/0.8 | 2.5 | 0.8 | 0.8 | 0.8 | 4.5 |
| ADZ** (m) | 2.5 | 2.5/4 | 8 | 4 | 4 | 4 | 15 |
| Range*** (km) | 10 | 10/80 | 20 | 80 | 120 | 150 | 180 |
* EDZ: Event Dead Zone
** ADZ: Attenuation Dead Zone
*** The typical range is given as an indication only and does not take into account the optical budget of the connection.
JDSU OTDR 41 XX optical modules compatible with JDSU T-BERD/MTS-4000 platforms
The T-BERD/MTS-4000 test platform promotes OTDR optical modules and copper modules. The table below will help you to navigate in the optical range of products.
-
Compatible with T-BERD/MTS-4000
-
Available for PC or APC
-
Fitted with removable optical adaptors (SC, FC, ST, etc.)
-
Screw tightening system (no specific tooling required)
-
Optional optical power meter and source on the same port
-
1625 nm filtered for the in-service test
-
Optical And copper modules available
-
PON OLP-4057 module for insertion measurements (OLP-57)
| Model | LM Last Mile |
MA Metro Access |
| Wavelength (nm) | 1310/1550 1625/1650 (1625 filtered) |
1310/1550 1625/1650 (1625 filtered) |
| Dynamic range (dB) | 32/30 30/28 |
37/35 35/34 |
| EDZ* (m) | 1 | 0,9 |
| ADZ** (m) | 4 | 4 |
| Range*** (km) | 20 | 60 |
* EDZ: Event Dead Zone
** ADZ: Attenuation Dead Zone
*** The typical range is given as an indication only and does not take into account the optical budget of the connection.
Chromatic dispersion, modes of polarisation and attenuation profile measurements
The new JDSU optical module for dispersion measurements combines the measurement of the main dispersions into a single device: chromatic and polarisation mode dispersion.
-
Compatible with T-BERD/MTS-6000 / T-BERD/MTS-8000
-
Measurements processed in OFS-100/200
-
2 broadband sources available
-
Broadband source module or remote device
-
A single module to conduct 3 dispersion tests
-
Up to 55 dB dynamic range
-
Automatic testing for all measurements
In the above order, we can observe the results from fiber optic measurements conducted for polarisation dispersion, chromatic dispersion and spectral attenuation.