JDSU copper cable and network testers

Measures the distance to short circuits or open circuits in addition to short circuits between lines.

Measures single or dual conductor length in feet or meters.

Compatible with copper or aluminium cables 8 to 30 AWG.

Improves cable inventory management by measuring the length on coils.

Generates 4 tones for tracing cables.

Identifies and measures the power delivered by IEEE 802.3af PoE and Cisco In-Line Power

Detects and reports speed and capacities for active Ethernet components and other devices up to 100 Mb/s

Ping function verifying connectivity to network devices

Flashes a link indicator to identify the cable termination on active ports and uses the Cisco Discovery Protocol

Tests cabling configuration and verifies connectivity

Displays the length measurement, draws up a network connections diagram and generates selectable tones

Identifies the cable termination on active ports by flashing the relevant LED indicator

Measures cable length

Identifies open circuits, short circuits, split pairs, reversals and miswires in wiremap format

Conducts an unbalanced test to detect open circuits, short circuits and split pairs

Includes built-in RJ11 and RJ45 jacks and F-connector

Identifies up to 20 telephone, network or coaxial cable runs at a time

Generates a tone for probing

Two-line, 16-character, back-lit, full alphanumeric LCD screen with icon flags

Triple Play test solution: tests the wiring for voice, data and video

Performs the work of six measurement instruments: telephone test set, network tester, tone generator, cable tester/verifier, tone probe and Coax mapper

Comprises a main unit, a remote tester/probe, a microphone headset and accessories.

Measures cable length in feet or meters

Two-line LCD screen with icon flags displaying test results in wiremap format

Conducts unbalanced tests on short circuits, split pairs and open circuits

Auto-activation function produces test results within 2 seconds

Tests for open circuits, short circuits, miswires, split pairs and reversals remotely

Includes a tone generator

Actively scans and logs IEEE 802.11 wireless signal types b and g

Detects networks with hidden SSIDs

Displays Internet access capacities and encryption status for each wireless component

Pings IP addresses and checks for a viable Internet link

Negotiates with the network DHCP to identify components and IP/MAC addresses

Fully compatible with WEP 64 or 128 bits

Tests Ethernet cables to identify open circuits, short circuits, split pairs, miswires, and reversals

Shows cable faults as per TIA568 specifications

Displays all test results on an LCD screen, including PASS and FAIL results