MiniFlow Rapid Blowing machine

MiniFlow Rapid blowing machine is designed to answer to the FTTH networks indoor and outdoor deployment needs.

Compatible with 3 to 12 mm cable diameter
Duct diameter 7 to 20 mm
Preparation time: 4 min
Blowing distance (with air): Up to 3500 m
Blowing speed up to 100 m/min
Follow up of speed and cable length
Display of cable propulsion strength
Compact design

MAJOR IMPORTER OF TELECOM EQUIPMENT

Distributor in France and in 20 African countries

OFFICIAL FUJIKURA IMPORTER

Distributor of Fujikura splicers for over 25 years

VIAVI ELITE DISTRIBUTOR

Distributor partner of VIAVI for over 15 years

MiniFlow Rapid is a fiber optic cable blower oriented for access networks.

It is equipped with an electronic counter on which one can easily read the distance already blown and a manometer on which one can see the pressure in real time. Length of the blowing cable can be programmed on counter and once reached the blowing machine stops.

The technology developed by FREMCO allows optimal protection of fiber during the blowing process. As soon as the cable is subjected to unexpected mechanical stress or in the event of excessive stress, the machine chain continues to turn and the cable immediately stops moving. PowerFlow Rapid is equipped with a "Hold to run" system, means operator must perform a continuous action on the joystick of the hydraulic control unit for the machine to produce movement. If action ceases, the joystick returns to neutral and all movement of the machine stops immediately.

The safety mechanism is compatible with all types of cable diameters available.

The following equipment is required to use the machine